VFE Air Controls

1. Air first passes through a Pre Filter

2. Removing major dust particles, moisture, and oil droplets

3. The micro filter then eliminates mist-form moisture, oil, and small dust particle

4. Controlled by a timer-based panel, solenoid valves manage drying and regeneration modes in a 10-minute cycle.

4. A dust filter at the outlet ensures high-quality air with a standard dew point of up to -40°C ADPC and an oil content of 0.1 PPM.

Air first passes through a pre-filter, removing major dust particles, moisture, and oil droplets. A microfilter then eliminates mist-form moisture, oil, and small dust particles, prolonging the life of the equipment.
Only vapor content enters the desiccant towers post-pre-filtration, with desiccant type based on the desired dew point. Controlled by a timer-based panel, solenoid valves manage drying and regeneration modes in a 10-minute cycle.
A dust filter at the outlet ensures high-quality air with a standard dew point of up to -40°C ADPC and an oil content of 0.1 PPM.

Key Points

Pre-filtration involves a pre-filter with a sintered bronze element and a micro filter made of micro glass fiber.
Desiccant towers remove vaporized moisture, with one tower in drying mode and the other in regeneration mode controlled by solenoid valves.

Note: High pressure and lowest dew point up to (-) 70deg Celsius ADP are optional.

The air undergoes pre-cooling and moisture separation in a compact three-in-one heat exchanger, ensuring efficient moisture removal.
Its compact design and efficient operation make it suitable for various applications where high-quality compressed air is essential.